Adjustable speed 463 lbs Dry Weight12 kW
Meet the Piccolo GV 3 Plus
The Piccolo GV 3 Plus combines the latest diesel engine technology with a new way of producing electrical power. Instead of adding an alternator with fixed speed on the back of the fly-wheel, we have designed a very compact permanent magnet alternator (PM), located just behind the engine. The Piccolo GV 3 Plus is designed to produce DC power by connecting up to 3 superchargers (DC PowerCubes), which can be connected to shore/land power as well.
Main Specifications
-
Continuous Power at 25°C (77°F)12 kW
-
Number of DC PowerCubes3
-
Nominal output voltage24/48 VDC
-
Rpm range1500 .. 2500 rpm, adjustable
-
EngineWhisperPower Kubota D1105
-
Emission classStage V / EPA / Tier 4
-
Length x width x height (cabinet) (in.)34.6 x 22.4 x 27.2 inches
-
Length x width x height (3 x DC PowerCube (in.)3 times: 22.6 x 8.7 x 12.4 inches
-
Dry weight (cabinet + 3 x DC PowerCube) (lb.)463 + 3 x 57.3 lbs
*The weight is measured with the short shaft version.
*The weight is measured with the short shaft version.
All specifications
| ARTICLE NUMBER | |
|---|---|
| 49001505 | Piccolo GV 3 Plus - Genverter |
| 49001506 | Piccolo GV 3 Plus - Ungrounded |
| 49001530 | Piccolo GV 3 Plus - Keel cooling |
| MAIN SPECIFICATIONS | |
|---|---|
| Continuous Power at 25ºC (77ºF) | 12 kW |
| Number of DC PowerCubes | 3 |
| Nominal output voltage | 24/48 VDC |
| Charge characteristics | Bulk, absorption, float |
| Noise level | 54 dB(A) at 7 m, 65 dB(A) at 1m |
| Rpm range | 1500 .. 2500 rpm, adjustable |
| Alternator technology | Permanent magnet |
| Generator cooling | Indirect water cooling (engine + alternator) |
| Generator control | DDC |
| Control panel | DDC Local + DDC Remote |
| DIESEL ENGINE SPECIFICATIONS | |
|---|---|
| Engine | WhisperPower Kubota D1105 |
| Engine family | PKBXL01.5DCB |
| Displacement | 1.123 cc |
| Cylinders | 3 |
| Bore & stroke, mm (in.) | 87 x 78.4 (3.4 x 3.1) |
| Compression ratio | 24.0 |
| Air consumption | <1.47 m3 / min |
| Cooling system | Heat exchanger |
| Fuel consumption (no load - full load) | 4.2-5.6 l/hr |
| Starter battery charge method/ current | Alternator 12 V / 40 A |
| DIMENSIONS & WEIGHT | |
|---|---|
| Length x width x height (cabinet), mm (in.) | 880 x 570 x 690 (34.6 x 22.4 x 27.2) |
| Length x width x height (3 x DC PowerCube), mm (in.) | 3 times: 575 x 221 x 316 (22.6 x 8.7 x 12.4) |
| Dry weight (cabinet + 3 x DC PowerCube), kg (lb.) | 210 + 3 x 26 (463 + 3 x 57.3) |
| Exhaust type, mm (in.) | Ø 40 (1.6), wet |
| Max. operating angle | 25º in all directions |